LMT – Laser strip thickness gauge

The gauge is designed for accurate non-contact measurement of strip thickness with a high resistance to heavy working conditions. Types: LMT-500A, LMT-750A, LMT-1000A (according to the depth of measurement)

Laser strip thickness gauge LMT-750A

Features:

  • use of four-point laser distance sensors of a new generation without the effect of changing the reflectivity of the surface and minimize influence by strip tilting if strip is wavy
  • automatic calibration using built-in standard
  • air blow of laser sensors against pollution (during measurement)
  • optics automatic cover of the laser sensor when the measurement is switched off
  • automated strip guidance
  • touch screen for easy entry of nominal thickness and limits

The control unit enables:

  • digital thickness display on 7 "touch screen
  • deviation display from the set nominal thickness
  • graphical representation of the thickness course
  • entering and monitoring lower and upper limits
  • control of the gauge guidance onto the strip
  • analogue outputs for AGC ± 20 mA (± 10 V, 4 - 20 mA)
  • serial data output module PROFINET (PROFIBUS,...)

Optional accessories:

Basic technical data:

Parameter LMT-350A (750A; 1000A)
Resolution 0.0001 mm
.00001"
0.001 mm
.00001"
0.001 mm
.0001"
Distance between sensors 30 mm
1.2"
60 mm
2.4"
140 mm
5.5"
Max. pass line variation during measurement ± 1.3 mm
± 0.05"
± 3.7 mm
± 0.15"
± 10 mm
± 0.4"
Measurement accuracy ≤ 1 µm
≤ 0.04 mil
≤ 2 µm
≤ 0.08 mil
≤ 5 µm
≤ 0.2 mil
Max. measurement depth from the strip edge 350 mm (750 mm, 1000 mm)
12" (20"; 40")

LMT-750A:

图片

  • Laser strip thickness gauge on the strip
  • Built-in calibration standard
  • HMI-Touch panel box
  • HMI-Touch panel 7 - trend graph
  • HMI-Touch panel 7 - thickness evaluation

Attached files